LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSSLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004DWide Supply Range:DDDDDDdescription/ordering informationThese devices consist of two independent,high-gain, frequency-compensated operationalamplifiers designed to operate from a singlesupply over a wide range of voltages. Operation from split supplies also is possible if the difference betweenthe two supplies is 3 V to 32 V (3 V to 26 V for the LM2904), and VCC is at least 1.5 V more positive than theinput common-mode voltage. The low supply-current drain is independent of the magnitude of the supplyvoltage.Applications include transducer amplifiers, dc amplification blocks, and all the conventional operationalamplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example,these devices can be operated directly from the standard 5-V supply used in digital systems and easily canprovide the required interface electronics without additional ±5-V supplies.NC − No internal connectionPlease be aware that an important notice concerning availability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.Copyright 2004, Texas Instruments IncorporatedOn products compliant to MILĆPRFĆ38535, all parameters are testedunless otherwise noted. On all other products, productionprocessing does not necessarily include testing of all parameters.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•NCGNDNC2IN+NC− Single Supply...3Vto32V(26 V for LM2904)− or Dual Supplies...+1.5 V to +16 V(+13 V for LM2904)Low Supply-Current Drain, Independent ofSupply Voltage...0.7 mA TypCommon-Mode Input Voltage RangeIncludes Ground, Allowing Direct SensingNear GroundLow Input Bias and Offset Parameters:− Input Offset Voltage...3mVTypA Versions...2mVTyp− Input Offset Current...2 nA Typ− Input Bias Current...20 nA TypA Versions...15 nA TypDifferential Input Voltage Range Equal toMaximum-Rated Supply Voltage...32V(26 Vfor LM2904)Open-Loop Differential VoltageAmplification...100 V/mV TypInternal Frequency CompensationLM158, LM158A...JG PACKAGELM258, LM258A...D, DGK, OR P PACKAGELM358...D, DGK, P, PS, OR PW PACKAGELM358A...D, DGK, P, OR PW PACKAGELM2904...D, DGK, P, PS, OR PW PACKAGE(TOP VIEW)1OUT1IN−1IN+GND12348765VCC2OUT2IN−2IN+LM158, LM158A...FK PACKAGE(TOP VIEW)NC1OUTNCVCC+NCNC1IN−NC1IN+NC4567832120191817161514910111213NC2OUTNC2IN−NC1SLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSdescription/ordering information (continued)ORDERING INFORMATIONTAVIOmaxAT 25°CMAXTESTEDVCCPDIP (P)SOIC (D)7 mV30 VSOP (PS)TSSOP (PW)0°C to 70°CMSOP/VSSOP (DGK)PDIP (P)SOIC (D)3 mV30 VTSSOP (PW)MSOP/VSSOP (DGK)PDIP (P)5 mV−25°C to 85°C3 mV30 V30 VSOIC (D)MSOP/VSSOP (DGK)PDIP (P)SOIC (D)MSOP/VSSOP (DGK)PDIP (P)SOIC (D)7 mV−40°C to 125°C26 VSOP (PS)TSSOP (PW)MSOP/VSSOP (DGK)7 mV2 mV5 mV−55°C to 125°C2 mV30 V32 V32 V30 VSOIC (D)TSSOP (PW)SOIC (D)TSSOP (PW)CDIP (JG)LCCC (FK)CDIP (JG)LCCC (FK)PACKAGE†Tube of 50Tube of 75Reel of 2500Reel of 2000Tube of 150Reel of 2000Reel of 2500Tube of 50Tube of 75Reel of 2500Tube of 150Reel of 2000Reel of 2500Tube of 50Tube of 75Reel of 2500Reel of 2500Tube of 50Tube of 75Reel of 2500Reel of 2500Tube of 50Tube of 75Reel of 2500Reel of 2000Tube of 150Reel of 2000Reel of 2500Reel of 2500Reel of 2000Reel of 2500Reel of 2000Tube of 50Tube of 55Tube of 50Tube of 55ORDERABLEPART NUMBERLM358PLM358DLM358DRLM358PSRLM358PWLM358PWRLM358DGKRLM358APLM358ADLM358ADRLM358APWLM358APWRLM358ADGKRLM258PLM258DLM258DRLM258DGKRLM258APLM258ADLM258ADRLM258ADGKRLM2904PLM2904DLM2904DRLM2904PSRLM2904PWLM2904PWRLM2904DGKRLM2904VQDRLM2904VQPWRLM2904AVQDRLM2904AVQPWRLM158JGLM158FKLM158AJGLM158AFKTOP-SIDEMARKINGLM358PLM358L358L358M5_‡LM358APLM358AL358AM6_‡LM258PLM258M2_‡LM258APLM258AM3_‡LM2904PLM2904L2904L2904MB_‡L2904VL2904VL2904AVL2904AVLM158JGLM158FKLM158AJGLM158AFK†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.‡The actual top-side marking has one additional character that designates the assembly/test site.2POST OFFICE BOX 655303 DALLAS, TEXAS 75265•LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSSLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004symbol (each amplifier)IN+IN−+−OUTschematic (each amplifier)VCC+≈6-µACurrentRegulator≈6-µACurrentRegulator≈100-µACurrentRegulatorIN−OUTIN+≈50-µACurrentRegulatorGND (or VCC−)To Other AmplifierCOMPONENT COUNTEpi-FETDiodesResistorsTransistorsCapacitors127512POST OFFICE BOX 655303 DALLAS, TEXAS 75265•3SLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSabsolute maximum ratings over operating free-air temperature range (unless otherwise noted)†LM158, LM158ALM258, LM258ALM358, LM358ALM2904VSupply voltage, VCC (see Note 1)Differential input voltage, VID (see Note 2)Input voltage, VI (either input)Duration of output short circuit (one amplifier) to groundat (or below) 25°C free-air temperature (VCC ≤ 15 V) (see Note 3)D packageDGK packagePackage thermal impedance, qJA (see Notes 4 and 5)P packagePS packagePW packagePackage thermal impedance, qJC (see Notes 6 and 7)FK packageJG packageLM158, LM158AOperating free-air temperature range, TALM258, LM258ALM358, LM358ALM2904Operating virtual junction temperature, TJCase temperature for 60 secondsLead temperature 1,6 mm (1/16 inch) from case for 60 secondsFK packageJG package±16 or 32±32−0.3 to 32Unlimited9717285951495.6114.5−55 to 125−25 to 850 to 70−40 to 125150260300300−40 to 125150°C°C°C°CLM2904±13 or 26±26−0.3 to 26Unlimited971728595149°C/W°C/WUNITVVVStorage temperature range, Tstg−65 to 150−65 to 150°C†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.NOTES:1.All voltage values, except differential voltages and VCC specified for measurement of IOS, are with respect to the network groundterminal.2.Differential voltages are at IN+ with respect to IN−.3.Short circuits from outputs to VCC can cause excessive heating and eventual destruction.4.Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowableambient temperature is PD = (TJ(max) − TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.5.The package thermal impedance is calculated in accordance with JESD 51-7.6.Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable casetemperature is PD = (TJ(max) − TC)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability.7.The package thermal impedance is calculated in accordance with MIL-STD-883.4POST OFFICE BOX 655303 DALLAS, TEXAS 75265•LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSSLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)PARAMETERTEST CONDITIONS†VCC = 5 V to MAX,VIC = VICR(min),VO = 1.4 VTA‡25°CFull rangeFull range25°CFull rangeFull range25°CFull range25°CVCC = 5 V to MAXFull rangeRL ≥ 2 kΩVOHHigh-leveloutput voltageLow-leveloutput voltageLarge-signaldifferentialvoltage amplificationCommon-moderejection ratioSupply-voltagerejection ratio(∆VDD/∆VIO)Crosstalk attenuationRL ≥ 10 kΩVCC = MAXRL ≤ 10 kΩVCC = 15 V, VO = 1 V to 11 V,RL ≥2 kΩVCC = 5 V to MAX,VIC = VICR(min)VCC = 5 V to MAXf = 1 kHz to 20 kHzVCC = 15 V,VID = 1 V,VO = 0SourceRL = 2 kΩRL ≥ 10 kΩ25°C25°CFull rangeFull rangeFull range25°CFull range25°C25°C25°C25°CFull range25°CFull range25°C25°CFull rangeFull range−20−101051230±400.71±601.22205025706580100120−30−20−101051230±400.71±601.22mAµAmA20mA2627285100202515656580100120−302627285100V/mVdBdBdB20mV0 toVCC − 1.50 toVCC − 2VCC − 1.510−20−150−3000 toVCC − 1.50 toVCC − 2VCC − 1.5V723010010−20−250−500LM158LM258MINTYP§3LM358MAX577250150MINTYP§3MAX79mVUNITVIOInput offset voltageAverage temperaturecoefficient ofinput offset voltageInput offset currentAverage temperaturecoefficient ofinput offset currentInput bias currentaVIOµV/°CIIOaIVO = 1.4 VnApA/°CIOIIBVO = 1.4 VnAVICRCommon-modeinput voltage rangeVVOLAVDCMRRkSVRVO1/VO2IOOutput currentIOIOSICCOutput currentShort-circuitoutput currentSupply current(two amplifiers)VCC = 15 V,SinkVID = −1 V,VO = 15 VVID = −1 V, VO = 200 mVVCC at 5 V, GND at −5 V,VO = 0VO = 2.5 V, No loadVCC = MAX, VO = 0.5 V,No load†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC fortesting purposes is 26 V for the LM2904 and 30 V for others.‡Full range is −55°C to 125°C for LM158, −25°C to 85°C for LM258, 0°C to 70°C for LM358, and −40°C to 125°C for LM2904.§All typical values are at TA = 25°C.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•5SLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSelectrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)PARAMETERTEST CONDITIONS†Non-A devicesA-suffix devicesTA‡25°CFull range25°CFull rangeFull rangeNon-V deviceIIOInput offset currentVO = 1.4 VV-suffix deviceaIAverage temperature coefficientof input offset currentInput bias currentVO = 1.4 V25°CFull range25°CFull rangeFull range25°CFull range25°CVCC = 5 V to MAXFull rangeRL ≥ 10 kΩVOHHigh-level output voltageVCC = MAX,Non-V deviceVCC = MAX,V-suffix deviceVOLAVDCMRRkSVRVO1/VO2Low-level output voltageLarge-signal differentialvoltage amplificationCommon-mode rejection ratioSupply-voltage rejection ratio(∆VDD/∆VIO)Crosstalk attenuationRL ≤ 10 kΩVCC = 15 V, VO = 1 V to 11 V,RL ≥2 kΩVCC = 5 V to MAX,VIC = VICR(min)VCC = 5 V to MAXf = 1 kHz to 20 kHzVCC = 15 V,VID = 1 V, VO = 0IOOutput currentVCC = 15 V,VID = −1 V,VO = 15 VVID = −1 V,VO = 200 mVIOSICCShort-circuit output currentSupply current (two amplifiers)SourceNon-V deviceV-suffix deviceRL = 2 kΩRL ≥ 10 kΩRL = 2 kΩRL ≥ 10 kΩ25°CFull rangeFull rangeFull rangeFull rangeFull range25°CFull range25°C25°C25°C25°C25°CFull range25°CSinkNon-V deviceV-suffix deviceFull range25°C25°C25°CFull range12−20−101053040±400.7±601.22025155065658080100120−300 toVCC − 1.50 toVCC − 2VCC − 1.52223262728510020mVV/mVdBdBdBmAmAmAmAµAmA24V10−20−250−5002725030050150pA/°CnAnA1LM2904MINTYP§3MAX71024µV/°CmVUNITVIOInput offset voltageVCC = 5 V to MAX,VIC = VICR(min), VO = 1.4 VaVIOAverage temperature coefficientof input offset voltageIOIIBVICRCommon-mode input voltagerangeVmAVCC = MAX, VO = 0.5 V, No loadFull range12†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC fortesting purposes is 26 V for the LM2904, 32 V for the LM2904V, and 30 V for others.‡Full range is −55°C to 125°C for LM158, −25°C to 85°C for LM258, 0°C to 70°C for LM358, and −40°C to 125°C for LM2904.§All typical values are at TA = 25°C.VCC at 5 V, GND at −5 V, VO = 0VO = 2.5 V, No load6POST OFFICE BOX 655303 DALLAS, TEXAS 75265•LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSSLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)PARAMETERTEST CONDITIONS†VCC = 5 V to 30 V,VIC = VICR(min),VO = 1.4 VTA‡25°CFull rangeLM158AMINTYP§MAX2415*103010−150 toVCC − 1.50 toVCC − 2VCC − 1.526272855025706580100120−20−101051230±400.71±601.2220−30−60−20−101051230±400.71±601.22mAµAmA20mA100205025706580100120−30−60200−50−1000 toVCC − 1.50 toVCC − 2VCC − 1.52627285100V/mVdBdBdB20mV10−15LM258AMINTYP§2MAX34mVUNITVIOInput offset voltageAveragetemperaturecoefficient ofinput offset voltageInput offset currentAveragetemperaturecoefficient ofinput offset currentInput bias currentaVIOFull range25°CFull rangeFull range25°CFull range25°CVCC = 30 VFull rangeRL ≥ 2 kΩVCC = 30 VRL ≤ 10 kΩVCC = 15 V,VO = 1 V to 11 V,RL ≥2 kΩRL = 2 kΩRL ≥ 10 kΩ25°CFull rangeFull rangeFull range25°CFull range25°C25°Cf = 1 kHz to 20 kHzVCC = 15 V,SourceVID = 1 V,VO = 0VCC = 15 V,SinkVID = −1 V,VO = 15VID = −1 V, VO = 200 mVVCC at 5 V, GND at −5 V,VO = 0VO = 2.5 V, No loadVCC = MAX, VO = 0.5 V,No load25°C25°CFull range25°CFull range25°C25°CFull rangeFull range7272151530200−80−100µV/°CIIOaIVO = 1.4 VnAIOpA/°CIIBVO = 1.4 VnAVICRCommon-modeinput voltage rangeVVOHVOLAVDCMRRkSVRVO1/VO2High-leveloutput voltageLow-leveloutput voltageLarge-signaldifferentialvoltage amplificationCommon-moderejection ratioSupply-voltagerejection ratio(∆VDD/∆VIO)CrosstalkattenuationVIOOutput currentIOSICCShort-circuit outputcurrentSupply current (twoamplifiers)*On products compliant to MIL-PRF-38535, this parameter is not production tested.†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC fortesting purposes is 26 V for LM2904 and 30 V for others.‡Full range is −55°C to 125°C for LM158A, −25°C to 85°C for LM258A, and 0°C to 70°C for LM358A.§All typical values are at TA = 25°C.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•7SLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSelectrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)PARAMETERVIOaVIOTEST CONDITIONS†VCC = 5 V to 30 V,VIC = VICR(min), VO = 1.4 VTA‡25°CFull rangeFull rangeLM358AMINTYP§2MAX35UNITmVµV/°CnApA/°CnAInput offset voltageAverage temperature coefficient ofinput offset voltageInput offset currentAverage temperature coefficient ofinput offset currentInput bias current72203075IIOaIIOVO = 1.4 V25°CFull rangeFull range10−150 toVCC − 1.50 toVCC − 2VCC − 1.526272515656580100120−20−1010530±400.720−30285100300−100−200IIBVO = 1.4 V25°CFull range25°CVICRCommon-mode input voltage rangeVCC = 30 VFull rangeRL ≥ 2 kΩ25°CRL = 2 kΩRL ≥ 10 kΩFull rangeFull rangeFull range25°CFull range25°C25°Cf = 1 kHz to 20 kHzVCC = 15 V,VID = 1 V,VO = 0Source25°C25°CFull range25°CFull range25°C25°CFull rangeVVOHVOLAVDCMRRkSVRVO1/VO2High-level output voltageLow-level output voltageLarge-signal differentialvoltage amplificationCommon-mode rejection ratioSupply-voltage rejection ratio(∆VDD/∆VIO)Crosstalk attenuationVCC = 30 VRL ≤ 10 kΩV20mVV/mVdBdBdB−60mAVCC = 15 V, VO = 1 V to 11 V,RL ≥2 kΩIOOutput currentVCC = 15 V,VID = −1 V,SinkVO = 15 VVID = −1 V, VO = 200 mVVCC at 5 V, GND at −5 V, VO = 0VO = 2.5 V, No loadµA±601.2mAIOSICCShort-circuit output currentSupply current (two amplifiers)mAVCC = MAX, VO = 0.5 V, No loadFull range12†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC fortesting purposes is 26 V for LM2904 and 30 V for others.‡Full range is −55°C to 125°C for LM158A, −25°C to 85°C for LM258A, and 0°C to 70°C for LM358A.§All typical values are at TA = 25°C.8POST OFFICE BOX 655303 DALLAS, TEXAS 75265•LM158, LM158A, LM258, LM258ALM358, LM358A, LM2904, LM2904VDUAL OPERATIONAL AMPLIFIERSSLOS068P − JUNE 1976 − REVISED SEPTEMBER 2004operating conditions, VCC = ±15 V, TA = 25°CPARAMETERSRB1VnSlew rate at unity gainUnity-gain bandwidthEquivalent input noise voltageTEST CONDITIONSRL = 1 MΩ, CL = 30 pF, VI = ±10 V(see Figure 1)RL = 1 MΩ, CL = 20 pF (see Figure 1)RS = 100 Ω, VI = 0 V, f = 1 kHz(see Figure 2)TYP0.30.740UNITV/µsMHznV/√HzVCC+−VI+VCC−CLRLVOFigure 1. Unity-Gain Amplifier900 ΩVCC+−RS+VCC−VO100 ΩVI = 0 VFigure 2. Noise-Test CircuitPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•9PACKAGEOPTIONADDENDUM
www.ti.com
4-Mar-2005
PACKAGINGINFORMATION
OrderableDevice5962-87710012A5962-8771001PA5962-87710022A5962-8771002PALM158AFKBLM158AJGLM158AJGBLM158FKBLM158JGLM158JGBLM258ADLM258ADGKRLM258ADRLM258APLM258DLM258DGKRLM258DRLM258PLM2904AVQDRLM2904AVQPWR
LM2904DLM2904DGKRLM2904DRLM2904PLM2904PSRLM2904PWLM2904PWLELM2904PWRLM2904QDLM2904QDR
Status(1)ACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEOBSOLETEACTIVEOBSOLETEOBSOLETE
PackageTypeLCCCCDIPLCCCCDIPLCCCCDIPCDIPLCCCCDIPCDIPSOICMSOPSOICPDIPSOICMSOPSOICPDIPSOICTSSOPSOICMSOPSOICPDIPSOTSSOPTSSOPTSSOPSOICSOIC
PackageDrawingFKJGFKJGFKJGJGFKJGJGDDGKDPDDGKDPDPWDDGKDPPSPWPWPWDD
PinsPackageEcoPlan(2)
Qty2082082088208888888888888888888888
2000111111111175
NoneNoneNoneNoneNoneNoneNoneNoneNoneNonePb-Free(RoHS)
Lead/BallFinish
MSLPeakTemp(3)
POST-PLATELevel-NC-NC-NCA42SNPBA42SNPBA42SNPBA42SNPBA42SNPBA42SNPBCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCallTICUNIPDAUCallTICUNIPDAU
Level-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NCLevel-2-260C-1YEAR/Level-1-235C-UNLIMLevel-2-260C-1YEARLevel-2-260C-1YEAR/Level-1-235C-UNLIMLevel-NC-NC-NCLevel-2-260C-1YEAR/Level-1-235C-UNLIMLevel-2-260C-1YEARLevel-1-260C-UNLIMLevel-NC-NC-NCLevel-2-250C-1YEAR/Level-1-235C-UNLIMLevel-1-250C-UNLIMLevel-2-260C-1YEAR/Level-1-235C-UNLIMLevel-2-260C-1YEARLevel-1-260C-UNLIMLevel-NC-NC-NCLevel-2-260C-1YEAR/Level-1-235C-UNLIMLevel-1-250C-UNLIMCallTI
Level-1-250C-UNLIMCallTI
Level-2-250C-1YEAR/Level-1-235C-UNLIM
POST-PLATELevel-NC-NC-NCPOST-PLATELevel-NC-NC-NC
POST-PLATELevel-NC-NC-NC
2500Green(RoHS&
noSb/Br)25005075
Pb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)
2500Green(RoHS&
noSb/Br)2500Green(RoHS&
noSb/Br)502500200075
Pb-Free(RoHS)Pb-Free(RoHS)NonePb-Free(RoHS)
2500Green(RoHS&
noSb/Br)2500Green(RoHS&
noSb/Br)502000150
Pb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)NonePb-Free(RoHS)NonePb-Free(RoHS)
Addendum-Page1
PACKAGEOPTIONADDENDUM
www.ti.com
4-Mar-2005
OrderableDevice
LM2904QPLM2904VQDRLM2904VQPWRLM358ADLM358ADGKRLM358ADRLM358APLM358APWLM358APWRLM358DLM358DGKRLM358DRLM358PLM358PSLELM358PSRLM358PWLM358PWLELM358PWR
(1)
Status(1)OBSOLETEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEOBSOLETEACTIVEACTIVEOBSOLETEACTIVE
PackageTypePDIPSOICTSSOPSOICMSOPSOICPDIPTSSOPTSSOPSOICMSOPSOICPDIPSOSOTSSOPTSSOPTSSOP
PackageDrawing
PDPWDDGKDPPWPWDDGKDPPSPSPWPWPW
PinsPackageEcoPlan(2)
Qty888888888888888888
200020001502500200075
NonePb-Free(RoHS)NonePb-Free(RoHS)
Lead/BallFinish
CallTICUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCallTICUNIPDAUCUNIPDAUCallTICUNIPDAU
MSLPeakTemp(3)CallTI
Level-2-250C-1YEAR/Level-1-235C-UNLIMLevel-1-250C-UNLIMLevel-2-260C-1YEAR/Level-1-235C-UNLIMLevel-2-260C-1YEARLevel-1-260C-UNLIMLevel-NC-NC-NCLevel-1-250C-UNLIMLevel-1-250C-UNLIMLevel-1-260C-UNLIMLevel-2-260C-1YEARLevel-1-260C-UNLIMLevel-NC-NC-NCCallTI
Level-2-260C-1YEAR/Level-1-235C-UNLIMLevel-1-250C-UNLIMCallTI
Level-1-250C-UNLIM
2500Green(RoHS&
noSb/Br)2500Green(RoHS&
noSb/Br)50150200075
Pb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)Green(RoHS&noSb/Br)
2500Green(RoHS&
noSb/Br)2500Green(RoHS&
noSb/Br)50
Pb-Free(RoHS)NonePb-Free(RoHS)Pb-Free(RoHS)NonePb-Free(RoHS)
Themarketingstatusvaluesaredefinedasfollows:ACTIVE:Productdevicerecommendedfornewdesigns.
LIFEBUY:TIhasannouncedthatthedevicewillbediscontinued,andalifetime-buyperiodisineffect.
NRND:Notrecommendedfornewdesigns.Deviceisinproductiontosupportexistingcustomers,butTIdoesnotrecommendusingthispartinanewdesign.
PREVIEW:Devicehasbeenannouncedbutisnotinproduction.Samplesmayormaynotbeavailable.OBSOLETE:TIhasdiscontinuedtheproductionofthedevice.
(2)
EcoPlan-Maynotbecurrentlyavailable-pleasecheckhttp://www.ti.com/productcontentforthelatestavailabilityinformationandadditionalproductcontentdetails.
None:NotyetavailableLead(Pb-Free).
Pb-Free(RoHS):TI'sterms\"Lead-Free\"or\"Pb-Free\"meansemiconductorproductsthatarecompatiblewiththecurrentRoHSrequirementsforall6substances,includingtherequirementthatleadnotexceed0.1%byweightinhomogeneousmaterials.Wheredesignedtobesolderedathightemperatures,TIPb-Freeproductsaresuitableforuseinspecifiedlead-freeprocesses.
Green(RoHS&noSb/Br):TIdefines\"Green\"tomean\"Pb-Free\"andinaddition,usespackagematerialsthatdonotcontainhalogens,includingbromine(Br)orantimony(Sb)above0.1%oftotalproductweight.
(3)
MSL,PeakTemp.--TheMoistureSensitivityLevelratingaccordingtotheJEDECindustrystandardclassifications,andpeaksoldertemperature.
ImportantInformationandDisclaimer:TheinformationprovidedonthispagerepresentsTI'sknowledgeandbeliefasofthedatethatitis
Addendum-Page2
PACKAGEOPTIONADDENDUM
www.ti.com
4-Mar-2005
provided.TIbasesitsknowledgeandbeliefoninformationprovidedbythirdparties,andmakesnorepresentationorwarrantyastotheaccuracyofsuchinformation.Effortsareunderwaytobetterintegrateinformationfromthirdparties.TIhastakenandcontinuestotakereasonablestepstoproviderepresentativeandaccurateinformationbutmaynothaveconducteddestructivetestingorchemicalanalysisonincomingmaterialsandchemicals.TIandTIsuppliersconsidercertaininformationtobeproprietary,andthusCASnumbersandotherlimitedinformationmaynotbeavailableforrelease.
InnoeventshallTI'sliabilityarisingoutofsuchinformationexceedthetotalpurchasepriceoftheTIpart(s)atissueinthisdocumentsoldbyTItoCustomeronanannualbasis.
Addendum-Page3
MECHANICAL DATAMCER001A – JANUARY 1995 – REVISED JANUARY 1997JG (R-GDIP-T8)0.400 (10,16)0.355 (9,00)85CERAMIC DUAL-IN-LINE0.280 (7,11)0.245 (6,22)140.065 (1,65)0.045 (1,14)0.063 (1,60)0.015 (0,38)0.020 (0,51) MIN0.310 (7,87)0.290 (7,37)0.200 (5,08) MAXSeating Plane0.130 (3,30) MIN0.023 (0,58)0.015 (0,38)0.100 (2,54)0.014 (0,36)0.008 (0,20)0°–15°4040107/C 08/96NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a ceramic lid using glass frit.Index point is provided on cap for terminal identification.Falls within MIL STD 1835 GDIP1-T8POST OFFICE BOX 655303 DALLAS, TEXAS 75265• MECHANICAL DATA MLCC006B – OCTOBER 1996FK (S-CQCC-N**) 28 TERMINAL SHOWNLEADLESS CERAMIC CHIP CARRIER18171615141312NO. OFTERMINALS**111028987668584445220AMIN0.342(8,69)0.442(11,23)0.640(16,26)0.739(18,78)0.938(23,83)1.141(28,99)MAX0.358(9,09)0.458(11,63)0.660(16,76)0.761(19,32)0.962(24,43)1.165(29,59)MIN0.307(7,80)0.406(10,31)0.495(12,58)0.495(12,58)0.850(21,6)1.047(26,6)BMAX0.358(9,09)0.458(11,63)0.560(14,22)0.560(14,22)0.858(21,8)1.063(27,0)192021B SQ22A SQ23242526272812340.080 (2,03)0.064 (1,63)0.020 (0,51)0.010 (0,25)0.020 (0,51)0.010 (0,25)0.055 (1,40)0.045 (1,14)0.045 (1,14)0.035 (0,89)0.028 (0,71)0.022 (0,54)0.050 (1,27)0.045 (1,14)0.035 (0,89)4040140/D 10/96NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a metal lid.The terminals are gold plated.Falls within JEDEC MS-004POST OFFICE BOX 655303 DALLAS, TEXAS 75265•MECHANICAL DATAMPDI001A – JANUARY 1995 – REVISED JUNE 1999P (R-PDIP-T8)0.400 (10,60)0.355 (9,02)85PLASTIC DUAL-IN-LINE0.260 (6,60)0.240 (6,10)140.070 (1,78) MAX0.325 (8,26)0.300 (7,62)0.015 (0,38)0.200 (5,08) MAXSeating Plane0.125 (3,18) MIN0.010 (0,25) NOMGage Plane0.020 (0,51) MIN0.100 (2,54)0.021 (0,53)0.015 (0,38)0.010 (0,25)M0.430 (10,92)MAX4040082/D 05/98NOTES:A.All linear dimensions are in inches (millimeters).B.This drawing is subject to change without notice.C.Falls within JEDEC MS-001For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htmPOST OFFICE BOX 655303 DALLAS, TEXAS 75265• MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 MECHANICAL DATA PW (R-PDSO-G**) 14 PINS SHOWNPLASTIC SMALL-OUTLINE PACKAGE0,651480,300,190,10M0,15 NOM4,504,306,606,20Gage Plane0,251A70°–8°0,750,50Seating Plane1,20 MAX0,150,050,10PINS **DIMA MAX83,10145,10165,10206,60247,90289,80A MIN2,904,904,906,407,709,604040064/F 01/97NOTES:A.B.C.D.All linear dimensions are in millimeters.This drawing is subject to change without notice.Body dimensions do not include mold flash or protrusion not to exceed 0,15.Falls within JEDEC MO-153POST OFFICE BOX 655303 DALLAS, TEXAS 75265•IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. To minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:ProductsAmplifiersData ConvertersDSPInterfaceLogicPower MgmtMicrocontrollers
amplifier.ti.comdataconverter.ti.comdsp.ti.cominterface.ti.comlogic.ti.compower.ti.commicrocontroller.ti.com
ApplicationsAudioAutomotiveBroadbandDigital ControlMilitary
Optical NetworkingSecurityTelephonyVideo & ImagingWireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
www.ti.com/audiowww.ti.com/automotivewww.ti.com/broadbandwww.ti.com/digitalcontrolwww.ti.com/militarywww.ti.com/opticalnetworkwww.ti.com/securitywww.ti.com/telephonywww.ti.com/videowww.ti.com/wireless